Makita DCS411 Manuál s instrukcemi stáhnout pdf (Strana 20)

Instructions for periodic maintenance

To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance must be per‑

formed regularly. Guarantee claims can be recognized only if this work is performed regularly and properly. Failure to perform the

prescribed maintenance work can lead to accidents!

The user of the chain saw must not perform maintenance work which is not described in the instruction manual. All such work must

be carried out by a MAKITA service centre.

General Chain saw Clean exterior, check for damage. In case of damage,

have repaired by a qualied service centre immediately

Saw chain Sharpen regulary, replace in good time 16

Chain brake Have inspected regularly at an authorized service centre

Guide bar Turn over to ensure even wear of bearing surfaces

Replace in good time 11

Starter cable Check for damage. In case of damage,

have repaired by a qualied service centre immediately

Before each start Saw chain Inspect for damage and sharpness 16

Check chain tension 11

Guide bar Check for damage

Chain lubrication Functional check 15

Chain brake Functional check 14

OFF switch,

Safety locking button,

Throttle lever Functional check 14

Fuel/oil tank

cap Check for tightness

Every day Air lter Clean 19

Guide bar Check for damage, clean oil intake bore 14

Guide bar support Clean, in particular the oil guide groove 14,18

Idle speed Check (chain must not run) 15

Every week Fan housing Clean to ensure proper air cooling 9

Carburetor interior Clean (remove lter cover for access) 19

Chain brake Clean the brake band (sawdust, oil) 18

Spark plug Check and replace if necessary 19

Mufer Check tightness of mounting 9

Chain guide Check 9

Every 3 months Suction head Replace 18

Fuel, oil tanks Clean

Annually Chain saw Check at an authorized service centre

Storage Chain saw Clean exterior, check for damage. In case of damage,

have repaired by a qualied service centre immediately

Guide bar/chain Demount, clean and oil slightly

Clean the guide groove of the guide bar 17

Fuel, oil tanks Empty and clean

Carburetor Run empty

Page

Service, spare parts and guarantee

Maintenance and repair

The maintenance and repair of modern engines as well as all safety devices require qualied technical training and a special work‑

shop equipped with special tools and testing devices.

We therefore recommend that you consult a MAKITA service centre for all work not described in this instruction manual.

The MAKITA service centres have all the necessary equipment and skilled and experienced personnel, who can work out cost‑effective

solutions and advise you in all matters.

Please contact your nearest service centre (list enclosed).

1 2 ... 15 16 17 18 19 20 21 22 23 24

Komentáře k této Příručce

Žádné komentáře

Makita DCS411 Manuál s instrukcemi Strana 20

Komentáře k této Příručce

Související produkty a manuály pro Elektrické řetězové pily Makita DCS411